Armored PLENUM MTP/MPO Patch Cables – 12 Strand Small 3.0mm OD 100 Meter

Share:

Description

WHY ARMORED PATCH CORDS ARE WORTH IT:

  • nanoFIBER Stainless-Steel Armored Patch Cords protect the cables from mishandling, poor installations, crimping, bending, vermin attacks that will compromise the signal.
  • nanoFIBER™ armored cables allow fragile optical fiber to be installed in hazardous areas, including environments with excessive dust, oil, gas, moisture, or even damage-causing rodents.
  • nanoFIBER™ protects the glass fiber, adds strength with stainless-steel armor and are better than conventional patch cords!
  • Long In-Building pre-terminated cords are safe during installation and construction projects. Need for conduit can be averted in many installations.
  • Usage in all Pro AV, IT, FTTH, FTTD, FTTx, broadcast, data centers and any environment where loss of signal is not an option.
  • Can customize any solution from lengths, terminations and outer jackets to handle all environments.
  • MTP/MPO OS2 are by far the most common cables.
  • Stock Patch Cords –Armored PLENUM MPO-MPO in popular lengths: 1M, 2M, 3M, 5M, 10M, 15M, 25M, 35M, 50M, 75M and 100M.
  • MTP/MPO Male to MTP/MPO Male OS2 Single Mode Trunk Cable
    The MTP/MPO patch cord is bend-insensitive and pre-terminated with MTP® PRO connectors, factory polished for low loss performance.
    MTP/MPO design is focused on simplicity and reliability, ensuring a quick and effective method for polarity and pin configuration without the need to remove the housing or handle loose pins. One simple insertion into a specially designed MTP/MPO tool reverses the keying configuration by retracting the exposed key while simultaneously extracting a hidden key on the opposite side of the connector.
    Product Specification
    Connector A US Conec MTP® PRO Male (Pinned) Connector B US Conec MTP® PRO Male (Pinned)
    Fiber Mode OS2 9/125μm Wavelength 1310/1550nm
    Polish Type APC to APC Minimum Bend Radius 10mm
    Insertion Loss 0.35dB Return Loss ≥60dB
    Attenuation at 1310nm ≤0.32dB/km Attenuation at 1550nm ≤0.18dB/km
    Trunk Diameter 3.0mm Cable Jacket OFNP
    Installation Tensile Load 100 N Long-Term Tensile Load 50 N
    Operating Temperature -10°C to +70°C Storage Temperature -40°C to +85°C
    * MTP® is a registered trademark of US Conec Ltd. US Conec

Reviews

There are no reviews yet.

Be the first to review “Armored PLENUM MTP/MPO Patch Cables – 12 Strand Small 3.0mm OD 100 Meter”

Your email address will not be published. Required fields are marked *